Buckets & Grit Guards

The Grit Guard Washboard works in conjunction with the Grit Guard Insert in your wash bucket to separate the grit from the mitt! Like it's sister product, the Grit Guard Insert, the Grit Guard Washboard has NO flat surfaces for dirt or grit to be collected. Contaminants are extracted from cleaning tools while rubbing them on the downward stoke against the Washboard. 

Particles such as dirt, grit and grime from your wash mitt are the root cause of scratches and swirls in your vehicles finish. By using the Grit Guard Washboard together with the Grit Guard Insert you are insuring a clean, scratch-free wash mitt every time you go back to the bucket for water.  

All of the potentially harmful dirt settles in the bottom of the bucket, keeping it away from your mitt and away from your paint. This simple and cost effective method protects your precious painted surfaces from being scratched and saves your paint from swirl marks and scratches. 

Wash your car in style and safety with these large detailing buckets. With a 20L capacity, you'll have plenty of suds to go around your car. Perfectly paired with a grit guard to trap dirt instead of embedding on your wash mitt and potentially damaging your paint.

Perfect choice as part of your two-bucket wash method.

The best method for extracting harmful dirt and grit from your wash mitt or brush is to agitate your washing utensil while submerged in water.

Grit Guard is not a gimmick, it's common sense...when your mitt is in the water, the fibers are fluffed up. When you rub your mitt against Grit Guard in the water, the fluffed up fibers allow the Grit Guard to extract the dirt, grit and grime. Once dirt settles in the bottom of the bucket, the Grit Guard keeps it there by separating the wash water into four quadrants, so the water cannot be disturbed. Also works amazingly well on tile grouting! Fits most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

Specification

• 10 3/8" Diameter (263 mm)

• 2 1/2" Tall (63 mm)

• Fits most 12" diameter buckets.

• Outer ring can be trimmed to fit smaller buckets

The Grit Guard Inserts fit in the bottom of your wash bucket and separates the grit from the mitt! The inserts radial surface design extracts particles such as dirt, grit and grime from your wash mitt, providing a clean, scratch-free wash mitt every time you go back to the bucket for water. All of the potentially harmful dirt settle in the bottom of the bucket, keeping it our of your mitt and off of your paint. This simple and cost effective method protects your precious painted surfaces from being scratched and saves your paint from swirl marks and scratches.

The best method for extracting harmful dirt and grit from your wash mitt or brush is to agitate your washing utensil while submerged in water.

Grit Guard is not a gimmick, it's common sense...when your mitt is in the water, the fibers are fluffed up. When you rub your mitt against Grit Guard in the water, the fluffed up fibers allow the Grit Guard to extract the dirt, grit and grime. Once dirt settles in the bottom of the bucket, the Grit Guard keeps it there by separating the wash water into four quadrants, so the water cannot be disturbed. Also works amazingly well on tile grouting! Fits most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

Specification

• 10 3/8" Diameter (263 mm)

• 2 1/2" Tall (63 mm)

• Fits most 12" diameter buckets.

• Outer ring can be trimmed to fit smaller buckets

Introducing the Heavy Duty Detailing Bucket from Chemical Guys! This high quality bucket is the last detailing bucket you will ever have to buy. The rugged construction is 30% thicker than competitors’ buckets for ultimate durability. The compact tapered design stacks easily and stores with a small footprint, saving you valuable garage space. The internal dimensions are tailored to fit wash baffles like Grit Guard for the perfect scratch-free wash. Gamma Seal lids lock securely onto the flanged lip for a spill-proof seal that holds full loads of water. Each bucket comes with a sturdy steel baling wire and tough plastic carrying grip for ultimate portability! Accept no substitutes: The Heavy Duty Detailing Bucket is the only bucket that belongs in your arsenal!

Every Chemical Guys Heavy Duty Detailing Bucket is built out of food-grade high density polyethylene plastic. This material is renowned for its high strength-to-density ratio, and chemical resistance. The carrying handle is made from a tough steel baling wire that will not bend or break under heavy bucketloads of water and tons of suds. Heavy Duty Detailing Buckets are 90 mils thick—30% thicker than competitor’s standard buckets. All parts of the Heavy Duty Detailing Bucket are recyclable and reusable, which reduces waste and pollution and cleans the world even after they break!

The Grit Guard Bucket Dolly features 5 heavy-duty urethane casters that last longer and roll smoothly over cracks. Two of the casters lock, holding your bucket in place even on steep inclines. Rugged Bucket Dolly supports up to 250 pounds and is securely held in place with three thumb screws. Dolly will fit most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

ThGrit Guard Bucket Dolly can also be connected with an adapter to accommodate a two bucket car washing system.

The Grit Guard Bucket Dolly features 5 heavy-duty urethane casters that last longer and roll smoothly over cracks. Two of the casters lock, holding your bucket in place even on steep inclines. Rugged Bucket Dolly supports up to 250 pounds and is securely held in place with three thumb screws. Dolly will fit most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

ThGrit Guard Bucket Dolly can also be connected with an adapter to accommodate a two bucket car washing system.

The Grit Guard Bucket Dolly features 5 heavy-duty urethane casters that last longer and roll smoothly over cracks. Two of the casters lock, holding your bucket in place even on steep inclines. Rugged Bucket Dolly supports up to 250 pounds and is securely held in place with three thumb screws. Dolly will fit most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

ThGrit Guard Bucket Dolly can also be connected with an adapter to accommodate a two bucket car washing system.

The Chemical Guys Cyclone Dirt Trap bucket insert sits at the bottom of your bucket while you wash filtering water non-stop. It’s the filter that never stops. The cyclone Dirt Trap help eliminates wash swirls and scratches with Cyclone Dirt-Trap Filtration Technology.

The round wash screen separates abrasive dirt and silt from clean and soapy wash water with scores of cyclonic dirt funnels. Separating dirt from clean and soapy water keeps abrasive debris off the wash mitt, and therefore off the paintwork for a scratch-less car wash. Traditional wash baffles use large vertical screens or disposable mesh filters in an attempt to separate dirt from water, which always ends up cloudy with loose contamination and abrasive filth.

These designs are defeated by the mere act of dunking the mitt into the bucket, which pushes and pulls water and dirt straight through the vertical openings of the poorly-designed screens. The cyclone funnels of the Dirt Trap separate dirt through centripetal force and push it through tiny holes underneath the wash screen.

The dirt remains trapped underneath the funnels and cannot easily flow back up through the tips once the mitt is pulled out from the water. The one way Cyclone Filtration system is a passive filter that never needs replacing and does not rely on moving parts, no disposable filters, and requires no maintenance or energy to set up, use, or store.

WHY BUY THIS CHEMICAL GUYS PRODUCT?

• Helps keep your wash water clean while you wash

• Helps protect vehicle’s delicate finishes

• It belongs in your bucket

• Traps dirt at the bottom of bucket, filtering fresh water to the top

• Reduces swirls and scratches caused by improper washing

• Fits snugly at bottom of bucket for maximum dirt capture and scratch-reduction effects

• Stackable protection: stack in line or rotated 90° to enhance dirt cyclone and filter action

• Perfect for 3 gallon, 4 gallon, 5 gallon, 6 gallon, and 7 gallon wash buckets

• Dirt Trap Cyclones funnel and separate dirt away from wash water

• Cleans mitts, brushes, towels and other washing utensils

• Cyclone Scrub Ridge around every funnel agitates dirt from wash mitt and directs it directly through funnel

• Cleaner wash water reduces chances of scratching sensitive paintwork during a wash

• Geometric Filtering System strikes the perfect balance of funnel size, placement, and volume to maximize filtering effect

• Tailored for perfect fit and superior filtration in any car wash bucket

• No moving parts; No disposable filters; No maintenance

• Fits snugly in any standard 12’’ diameter bucket; product measures 10 5/16 inches in diameter

• Comes in multiple colors to avoid cross contamination between paint, wheel, and pad cleaning buckets

The Grit Guard Inserts fit in the bottom of your wash bucket and separates the grit from the mitt! The inserts radial surface design extracts particles such as dirt, grit and grime from your wash mitt, providing a clean, scratch-free wash mitt every time you go back to the bucket for water. All of the potentially harmful dirt settle in the bottom of the bucket, keeping it our of your mitt and off of your paint. This simple and cost effective method protects your precious painted surfaces from being scratched and saves your paint from swirl marks and scratches.

The best method for extracting harmful dirt and grit from your wash mitt or brush is to agitate your washing utensil while submerged in water.

Grit Guard is not a gimmick, it's common sense...when your mitt is in the water, the fibers are fluffed up. When you rub your mitt against Grit Guard in the water, the fluffed up fibers allow the Grit Guard to extract the dirt, grit and grime. Once dirt settles in the bottom of the bucket, the Grit Guard keeps it there by separating the wash water into four quadrants, so the water cannot be disturbed. Also works amazingly well on tile grouting! Fits most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

Specification

• 10 3/8" Diameter (263 mm)

• 2 1/2" Tall (63 mm)

• Fits most 12" diameter buckets.

• Outer ring can be trimmed to fit smaller buckets

The Grit Guard Inserts fit in the bottom of your wash bucket and separates the grit from the mitt! The inserts radial surface design extracts particles such as dirt, grit and grime from your wash mitt, providing a clean, scratch-free wash mitt every time you go back to the bucket for water. All of the potentially harmful dirt settle in the bottom of the bucket, keeping it our of your mitt and off of your paint. This simple and cost effective method protects your precious painted surfaces from being scratched and saves your paint from swirl marks and scratches.

• 10 3/8" Diameter (263 mm)

• 2 1/2" Tall (63 mm)

• Fits most 12" diameter buckets.

• Outer ring can be trimmed to fit smaller buckets

The best method for extracting harmful dirt and grit from your wash mitt or brush is to agitate your washing utensil while submerged in water.

Grit Guard is not a gimmick, it's common sense...when your mitt is in the water, the fibers are fluffed up. When you rub your mitt against Grit Guard in the water, the fluffed up fibers allow the Grit Guard to extract the dirt, grit and grime. Once dirt settles in the bottom of the bucket, the Grit Guard keeps it there by separating the wash water into four quadrants, so the water cannot be disturbed. Also works amazingly well on tile grouting! Fits most 3.5 gallon, 4 gallon, 5 gallon and 6 gallon buckets.

Specification