Snow Foam & Lances

ValetPro pH Neutral Snow Foam is a high foaming pre wash which produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. Using this ValetPro product means less work to remove the excess grime and prepares the car for shampooing. PH Neutral Snow Foam was specifically designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because meaning this product is safe to use on any surface.

Directions: 

1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20. 

2. Foam the entire vehicle. 

3. Leave to dwell but not dry out. 

4. Starting from the bottom, rinse off with a pressure washer. 

Please note: this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.

 

Linntec Professional Blueberry Blast Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Blueberry blast Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Glimmermann Snow Foam is a premium, high foaming, pH neutral shampoo containing a blend of gentle detergents, wetting agents and foamers. Glimmermann Tutti-Frutti Snow Foam loosens and removes road film, insects and dirty grit from your paintwork reducing the risk of scratching and swirl marks whilst washing. New formulation with advanced waxing properties for added paintwork protection.

Instructions for use:
We recommend : Apply through a foam lance with warm water. Use 100ml for every 1L of water. Once a blanket of foam has been applied, leave to dwell and rinse off with a high pressure washer. It can also be used as pressure washer detergent.
Dilute up to a ratio of 1:100.

Health & Safety:
Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.

Chemical Guys Watermelon Snow Foam has been at the top of the list for producing rich lathery suds for perfecting the ultimate scratch free wash. For the first time ever, every car owner’s first choice for car shampoos is now available in a limited edition watermelon scent.

Chemical Guys Limited Edition Watermelon Snow Foam Shampoo smells exactly like a juicy seedless watermelon ready to be carved up. Detail enthusiasts and professionals alike understand that traditional wash methods push dirt around on painted surfaces, inducing scratches and marring marks that rob your car of shine. Load up your foam cannon or foam gun with the Limited Edition Watermelon Snow Foam Shampoo, and lubricate the surface of your vehicle to deliver powerful hyper surfactants that slices through dirt and grime. Fill your soap bucket with Chemical Guys Limited Edition Watermelon Snow Foam Shampoo, and gently cleanse the paint with a premium chenille microfiber wash mitt to remove any abrasive dirt particles that robs the luster away from your vehicle’s paint.

The Chemical Guys Limited Edition Watermelon Snow Foam Shampoo creates the perfect amount of foam, and smells like freshly harvested fruit that will evoke fond memories of eating the sweet juicy flesh of a savory watermelon.

WHY BUY THIS PRODUCT?

• Limited Edition Watermelon scent smells like an orchard of freshly grown juicy watermelon

• Superior surface cleanser with advanced foaming technology

• High Suds

• Perfect for scratch free washes when combined with a foam cannon, foam gun or two bucket wash

• Ideal for maintenance wash

• Rinses clean with no residue

• Safe for wax and sealant

• Removes grime, build up and dirt

Gtechniq W4 Citrus Snow Foam is unlike traditional pre-wash snow foams that come loaded with caustic chemicals, W4 Citrus Foam is a pH neutral formula that removes hard to shift grime without damaging coatings.

It combines an effective citrus degreaser, with a foaming agent, making it tough on road grime and bug splatter.

It can be used at a dilution of up to 10:1 through a foam lance and also through a pump sprayer.

Directions:

• For best results use in a snow foam lance, out of direct sunlight

• Shake bottle well before use

• Decant one inch (2.5cm) of W4 into a foam lance and fill with warm water

• Spray onto the surface of the vehicle from bottom to top

• Leave the foam to dwell on the surface for three to five minutes, and then rinse thoroughly with clean water

• Do not allow the product to dry on the surface of the car

• Store in a cool, dry place

• Use within 12 months of opening

Chemical Guys HoneyDew Snow Foam is a super foam auto wash that removes dirt and grime to produce a brilliant shine. This unique Chemical Guys shampoo uses advanced foaming technology to capture and gently rinse away dirt particles. Honeydew Snow foam works great with any foam gun pro cannon for the ultimate no touch wash. The pH balanced formula rinses clean and is the perfect choice to maintain wax or sealant. The innovative auto wash uses foaming agents to create an extra thick foam to cleanse paintwork while removing tough dirt and debris. Honeydew snow foam is designed to wash any vehicle while providing a spot free finish.

Why Buy This Product?

• Superior surface cleanser

• Advanced foaming technology, High Suds

• Perfect for touchless, two bucket, or foam cannon wash

• Ideal for maintenance wash

• Rinses clean with no residue

• Safe for wax and sealant

• Removes grime, build up and dirt

Turn every car wash into a fun foam party with the TORQ Foam Blaster Foam Gun! Bored with the same car wash routine? Lack of suds and bubbles leaving your finish flat and tired? Add intense foam action to clean paint and add heaps of fun to the process! Improper car washing pushes dirt around and scratches paint. Slick car wash soap and foaming bubbles help loosen, lubricate, and float abrasive dirt away from paintwork for a gentler and safer cleaning experience.

The Chemical Guys TORQ Foam Blaster mixes car wash soap with air and running water to create foamy car wash suds. Cover the car with slick suds to break down stuck-on dirt, grease, and grime from exterior car parts. Continue on with a normal 2-bucket car wash method and microfiber wash mitt. For extra-sensitive paint finishes, spray the Foam Blaster directly into the wash mitt with every wipe to add extra lubrication. Spray down paintwork, wheels, undercarriages, exhaust systems, and even engine bays with soapy cleaning suds at the start of every car wash with the TORQ Foam Blaster Foam Gun.

The TORQ Foam Blaster Foam Gun combines the soapy water solution with air and running water to spray foam over your car. How dirty is your car? Very dirty? Not very dirty? Save soap and water by picking the perfect concentration with the adjustable TORQ Foam Blaster Foam Gun. Simply turn the dial to adjust the dilution ratio of the soapy foam sprayed from the nozzle. The soap solution bottle holds 32 oz. of liquid. Fill with plain water, then add 1 - 3 oz. of your favorite Chemical Guys car wash soap to suit the level and type of dirt on the vehicle. Light dust and road grime on the paintwork? Use just 1 ounce. Thick mud and bugs stuck all over the car? Try adding 3 ounces of soap. Start spraying the foam gun and turn the adjustable knob to the perfect thickness of soapy foam suds. The TORQ Foam Blaster Foam Gun is the versatile car wash tool for every detailing need. 

Why Buy This Product?

• High quality car wash foam gun

• Sprays soapy car wash foam

• No pressure washer required

• Works with any standard garden hose

• Solid corrosion-resistant construction

• Quick release fitting turns normal nozzle into foam gun

• Brass and aluminum parts do not rust or corrode

• Quality plastics resist cracking and fading from exposure

• Works with any premium Chemical Guys car wash soap

• Remove the thickest dirt and mud from any vehicle

ValetPro pH Neutral Snow Foam is a high foaming pre wash which produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. Using this ValetPro product means less work to remove the excess grime and prepares the car for shampooing. PH Neutral Snow Foam was specifically designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because meaning this product is safe to use on any surface.

Directions: 

1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20. 

2. Foam the entire vehicle. 

3. Leave to dwell but not dry out. 

4. Starting from the bottom, rinse off with a pressure washer. 

Please note: this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.

ValetPro pH Neutral Snow Foam is a high foaming pre wash which produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. Using this ValetPro product means less work to remove the excess grime and prepares the car for shampooing. PH Neutral Snow Foam was specifically designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because meaning this product is safe to use on any surface.

Directions: 

1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20. 

2. Foam the entire vehicle. 

3. Leave to dwell but not dry out. 

4. Starting from the bottom, rinse off with a pressure washer. 

Please note: this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.

ValetPro pH Neutral Snow Foam is a high foaming pre wash which produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. Using this ValetPro product means less work to remove the excess grime and prepares the car for shampooing. PH Neutral Snow Foam was specifically designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because meaning this product is safe to use on any surface.

Directions: 

1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20. 

2. Foam the entire vehicle. 

3. Leave to dwell but not dry out. 

4. Starting from the bottom, rinse off with a pressure washer. 

Please note: this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.

ValetPro pH Neutral Snow Foam is a high foaming pre wash which produces a thick foam that clings to the paint surface to enable the cleaner to penetrate grime for a deep clean. Using this ValetPro product means less work to remove the excess grime and prepares the car for shampooing. PH Neutral Snow Foam was specifically designed to work on well waxed surfaces, and the pH neutral formula is an added bonus because meaning this product is safe to use on any surface.

Directions: 

1. Dilute. Foam lance: 1:3 / Pump Spray: 1:20. 

2. Foam the entire vehicle. 

3. Leave to dwell but not dry out. 

4. Starting from the bottom, rinse off with a pressure washer. 

Please note: this product can freeze at 5 degrees. To correct, place in a bucket of warm water until consistency returns to normal.

Linntec Professional Sweet Apple Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Sweet Apple Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Sweet Apple Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Sweet Apple Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Blueberry Blast Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Blueberry Blast Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Blueberry Blast Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Blueberry Blast Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Blueberry Blast Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Blueberry Blast Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Sweet Apple Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Sweet Apple Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Blueberry Blast Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Blueberry blast Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Linntec Professional Sweet Apple Snow foam is a ph neutral pre-rinse formula for use with foam lances and foam guns. This snow foam will leave a white blanket of foam over the vehicle that helps to remove dirt and grime away from the paint's surface prior to shampooing your vehicle. Linntec Sweet Apple Snow Foam is ph neutral and is safe on all paint and will not strip already existing layers of wax or polish. 

This product is normally used at a concentration in the order of 5-1

To use this product with a snow foam lance use 100ml of snow foam with every 500ml of water. Adjust the feed rate to alter the thickness of foam required. Spray Linntec Blueberry Blast snow foam on the area to be cleaned, leave to dwell for 5 minutes and rinse off.

Autoglym Polar Blaster creates lashings of thick, clingy foam with Polar Blast, optimises the density required to efficiently deep clean with Polar Wash and produces the perfect consistency to apply the hyper-hydrophobic Polar Seal in seconds. The adjustable spray pattern allows you to easily follow your car’s contours, ensuring total coverage and appropriate dwell time on mud, traffic film and other contaminants. Complete a full exterior car care routine in a way that is quick, fun and safe for your car’s surfaces, reducing the risk of swirl marks and scratches.

Polar Blaster includes the Karcher K Series connector,

Autoglym Polar Wash is a safe and effective cleaner that should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Polar Blast. This impressive cleaner will cover your vehicle in a blanket of foam that makes light work of dirt, traffic film and road grime removal.

Auto Finesse Lavish Ceramic Foam utilises the latest innovation in the science of Si02 coatings. This high-foaming formula makes introducing a hydrophobic layer of ceramic protection to every exterior surface not only easy, but it takes just a matter of seconds to get the job done to the highest standard. A super-simple spray-on and rinse-off affair, what’s more, Lavish will even add a whole load of gloss along the way. Safe for use on everything from paintwork to glass and alloys to trim, Lavish gets to work immediately by bonding to all surfaces on a microscopic level, forming a super-durable, ceramic layer which stops grime from sticking and offers water behaviour that you can actually see. From the very first application you get nothing but the most impeccable shine, supreme water beading and up to 6-months protection, right at the wash stage. Use as a stand-alone coating or as a quick and easy top up to our Caramics range, Lavish can be utilised to enhance exterior protection every single time you wash. Ideal for any vehicle - no matter the size – our cutting-edge ceramic foam offers the quickest and easiest protection available, straight from your snow foam lance. The next generation of ceramic coating products is here.

Heighten your senses at the pre-wash stage, with the new Auto Finesse bubblegum scented Avalanche Snow Foam. Brand new to the Auto Finesse range, this Special Edition Avalanche Snow Foam offers all of the superior performance you’ve come to expect from the ever-popular Citrus Power infused pre-wash solution… but with the added bonus of a fresh hit of our sweetshop-inspired bubblegum fragrance. Avalanche Bubblegum Snow Foam forms a thick, creamy lather that loosens, lubricates and eradicates road grime prior to contact washing, removing the danger of spreading contaminates for the ultimate swirl free wash.

Super safe pre-wash, strip the dirt without the worry!

Twister Comfort is a super safe pre-wash that does not contain Sodium Hydroxide. Sodium Hydroxide is the dreaded chemical that causes marks on chrome and plastic parts and leaves streaks on fresh paintwork.

Twister Comfort is a highly concentrated product which can be diluted down at up to 1:25 (Product:Water) and applied via pressure sprayer or snow foam lance. Using a Snow Foam Lance Twister Comfort has an extremely stable foam which allows it to cling to the surface of your vehicle.

Always test on an inconspicuous area first.

Auto Finesse Avalanche snow foam is infused with Citrus Power bug and grime remover to make this foaming pre-wash solution the ultimate in pre-wash cleaners. It loosens and removes road grime prior to contact washing, doing most of the work for you, removing contaminants that may otherwise be moved around the vehicle during contact washing.

• A thick foam to cleanse paintwork of road contaminants.
• Citrus infused.
• Loosens dirt and road grime safely.
• Wax friendly and suitable for regular use .

There is absolutely no point in using expensive waxes and sealants striving to achieve a perfect finish if you don’t get the basics right at the outset. Most swirls and paint imperfections have to be addressed later on in the process because of poor detailing preparation and the effects of Foreign Object Damage (FOD) on paint (such as 'own goal' damage from grit and grime) having to be removed. However careful we all might strive to be, sometimes we make mistakes and damage happens. So it makes sense to be as methodical and as careful as we can be, from the very first stages of the cleaning process, not just at the end.

Bilt Hamber auto-foam is the result of extensive in-house research and development. auto-foam will reduce even further the possibility of damage to paintwork by presenting you with beautifully clear FOD free paint, ready for subsequent detailing.

Bilt Hamber auto-foam is a new generation premium quality, foaming water-based pre wash treatment, designed to soak and saturate soiled vehicle paintwork prior to the application of vehicle shampoo and paint food. auto-foam is gentle too and is for use with all pressure washer foam lances. Applied at a typical PIR (Panel Impact Ratio) of 4%, auto-foam will panel dwell for typically 5 minutes. auto-foam is formulated specifically to offer maximum wetting, it rinses easily too. It is not designed as a superficial high foam product but as a functional material.

Bilt Hamber auto-foam is made with biodegradable compounds, is extraordinarily tough on soil and grime, yet harmless to paint. The non-caustic formulation ensures that even regular use will not attack paint binders. Our hard working surfactants will attack and penetrate the hardest of road dirt and grime, without the need for manual intervention.

During the panel dwell period, auto-foam’s bubbles will systematically burst and move, encouraging our soaking and cleansing agents to start working. The effects of road grime are neutralised by them, by being bonded within our blend of surfactants, and then lifted from painted surfaces and physically removed, minimising harm caused by swirling and marking during subsequent detailing.

When auto-foam's work has been done, it may be washed off in a conventional manner, leaving a well presented automotive surface ready for further treatments.

For excessively soiled surfaces, simply increase PIR and/or number of applications.

Bouncer's 'Its All White' Premium Snowfoam is a mix of active biodegradable and environmentally accepted surfactants that will not strip existing wax or sealant protection. A pure, concentrated product used to remove grime and dirt prior to shampoo stage. Use via a snowfoam lance connected to a pressure washer. Fill 1ltr size lance with approx. 1 inch (100ml) of product, then top up with clean fresh water. Apply to car and leave for around 4/5 minutes to allow product to dwell and assist in dirt & grime removal.

Can also be used at 50ml to 1 Litre dilution rate for lighter maintenance washes. A 9/10 Trusted Car Products Approved status product.

Meguiar’s Ultimate Snow Foam is engineered specifically for coated, waxed or sealed finishes, Meguiar’s Ultimate Snow Foam cleans without stripping protection. The intense foam clings & clings, gently loosening road grime on lightly soiled cars to allow for a touch-less pressure rinse, yet also lubricates the surface on dirtier vehicles for when a wash mitt is required.

 

• pH NEUTRAL Snow Foam. Engineered specifically for coated, waxed or sealed finishes, Meguiar's Ultimate Snow Foam cleans without stripping protection
• EXTREME CLING. The intense foam clings & clings, gently loosening road grime on lightly soiled cars before pressure rinsing
• LUBRICATES THE SURFACE. Lubricates the surface as a pre-wash on dirtier vehicles for when a wash mitt is required.
• Easy to use: Simply mix 1 part snow foam with 5 parts water snow foam cannon bottle
• If Meguiar's Ultimate Snow Foam doesn't cling, it's a sure sign that it's time to wax, seal or coat your car's finish!

Sonax Profiline Actifoam is a high dirt-dissolving cleaner with excellent foam for washing cars using foam sprayer and is perfectly suited for use as shampoo, insect remover and rim cleaner.

Sonax Actifoam is concentrated and will wash a minimum of 50 cars. Actifoam is a high quality snow foam which is pleasantly scented, pH-neutral and has the best possible material compatibility, even for surfaces with foil adhesives.