Bilt Hamber Korrosol Fallout Remover 5LRegular price £52.95
Bilt Hamber Korrosol is a controlled pH non-alkaline fallout remover for the safe and effective removal of embedded metallic particles that contaminate the vast majority of road going vehicles.
You may not have noticed by looking at your paintwork, but next time it’s washed and clean lightly feel the paintwork, especially the horizontal panels; bonnet, boot lid, roof etc. Very gently with finger tip touch you’ll be able to feel a rough grittiness. You may well think this is dust landed from the air – it’s not. Airborne metallic particles liberated by braking surfaces, such as pads and discs fill the air along our roads. When the car in front of you brakes, your car travels through these hot metalic particles and they are left embedded in your paintwork.
How these particles destroy paint films
Here they react with rainwater or air moisture and begin to corrode. The corrosion product (rust) occupies four times the space of iron, and the paint is slowly ruptured around the embedded particle. This action destroys both the aesthetic and protective qualities of the vehicle finish.
Fast and effective... simply wash away
While harsh acids such as phosphoric and oxalic acids maybe use with good effect to remove the contamination, these acids to not discriminate between corrosion and good steel, not even paint films themselves, so while the particle is removed and base metals or coatings can also be attacked.
korrosols effective formula is simply sprayed onto the contaminated panel a rapid and dramatic colour change takes place which indicates that the corroded part is water soluble after which a rinse with water leaves the panel free of metallic embedment.
korrosol is safe to use on all auto body paint finishes including lacquers.
Alchemy Chemical X Iron Fallout Remover 500mlRegular price £11.99
There is nothing more satisfying than watching dirt literally slides off your wheels without you having to do little more than spray with Chemical X iron remover, that is what you get. The pH neutral gel formula, will cling to your wheels, break down the metal particles and safely remove them.
Alchemy Car Care Chemical X is a bleeding wheel cleaner, the solution gives a red tint as it reacts with the metal contamination on the wheels, all you have to do then is simply rinse it away.
Use on cool wheels, spray and leave to dwell for up to 5 minutes, before rinsing off with water.
MB14 Iron Fallout Remover 500mlRegular price £12.95
MB14 fallout remover is a very popular detailing product for anyone's detailing arsenal. MB14 Iron fallout remover reacts with the iron contamination found in brake dust that can become etched into wheels if not fully removed.
MB14 Iron fallout remover can also be used on paintwork during decontamination stages to remove fallout particles. This chemical reaction turns iron in to a water soluble solution, whilst also turning the solution to a deep purple colour as it reacts with the iron, making it easy to rinse away fallout particles. Combining specific surfactants and wetting agents it
Chemical Guys Decon Iron Remover 473mlRegular price £18.79
Chemical Guys Decon Pro Fallout Remover is a revolutionary gel that removes iron deposits and contamination from paintwork and wheels. The only way to truly remove iron particles from your vehicle is by using Decon Pro. The pH balanced gel safely removes iron particles from the surface of any vehicle.
Chemical Guys Decon Pro is designed to release iron particles such as brake dust, rail dust, ferrous metals and industrial contamination. Iron deposits can corrode on wheels and paintwork and cause paint and clear coat failure. Decon pro eliminates the iron deposits by cleaning the surface pores to preserve paintwork and wheels. The sprayable gel cleaner easily removes heavy brake dust and road grime to restore wheels.
Easily removes ferrous brake dust to protect wheels from further corrosion. The special catalyst in Decon Pro turns purple when the cleaner has finished removing iron particles from the surface. Decon Pro highlights ferrous iron contamination which can be easily rinsed away with clean water. Decontaminate paint and metal and remove iron deposits from any vehicle with Chemical Guys Decon Pro...
WHY BUY THIS PRODUCT?
- Reacts with iron deposits to neutralize bond with porous surfaces
- Formula neutralizes the reactions that cause rust and paint failure caused by hot brake dust particles
- Iron catalyst turns purple once reaction is complete
- pH-balanced formula safe for all wheel types, gloss paint, clear coat finishes, polished metal, chrome, and glass
- Add to wheel-cleaning arsenal to remove toughest stuck on brake dust and contaminants
- Finish the car wash process with DeCon Pro, then follow up with clay bar service for thorough decontamination during a full detail
Poorboy's Iron Fallout Remover 473mlRegular price £12.95
Poorboy's Iron Fallout Remover breaks up, dissolves and removes ferrous metallic iron particle contamination caused by rail dust, brake dust and industrial fallout. Iron remover from Poorboy's world may be used on all exterior painted surfaces, wheels, glass and chrome. Although poorboy's iron remover contains no dyes, a chemical reaction that produces a colour change occurs as it is breaking up and dissolving ferrous metals. This product will turn red/purple when sprayed on to a surface that is contaminated with iron particles. This is most easily seen on lighter colour vehicles but decontamination performance is equal on all colours. This lets you know iron is present and that Poorboy's Iron Remover is working too remove iron particle contamination.
ValetPro Dragons Breath Wheel CleanerRegular price £10.00
ValetPro Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel, showing you that it’s working. More importantly, this chemical reaction also turns iron into a water soluble solution which makes it easy to rinse away baked on brake dust. ValetPro Dragon’s Breath will easily clean general road grime away without a need for agitation, however the stubborn baked on brake dust may still require some agitation for the best results.
1. Spray into wheel.
2. Leave to dwell but not dry out.
3. Rinse off thoroughly with a pressure washer.
4. If necessary, reapply, agitate with a wheel brush and rinse thoroughly.
Sonax Fallout Remover 500mlRegular price £16.95
Removes aggressive rust deposits and small rust spots from paintwork surfaces. Suitable for removing industrial dust from paintwork and painted plastic surfaces. Cleans lime deposits and other
dirt from paintwork.
Auto Finesse Iron Out Contaminant and Fallout Remover 500mlRegular price £11.95
Auto Finesse® Iron Out iron-contaminate and fallout remover safely and effectively removes the tiny pieces of ferrous shrapnel that can embed itself into surfaces, targeting and dissolving them before significant damage can occur. The advanced, pH neutral, reactive gel formula is suitable to use on most exterior surfaces, including paintwork, aluminium (not bare aluminium), magnesium, stainless-steel, anodised finishes, chrome, glass, plastic, and even rubber. Iron Out also contains strong degreasing agents to help loosen road films, making it a powerful force in the decontamination process.
- Removes brake dust and iron particles from your vehicle.
- Advanced PH neutral formula.
- Suitable for paintwork, aluminium, anodised wheels and glass.
- Prevents paint corrosion with regular use.
- Contains degreasing agents to remove road grime.
Glimmermann Iron Fallout Remover 500mlRegular price £9.65
Glimmermann Iron Fallout Remover quickly and safely dissolves rusty iron residues. Dramatic bleeding will indicate heavy areas of iron deposits. Product is pH Neutral and Ammonium free, containing no acids, alkalis, oxidising agents or harmful solvents.
Instructions for use:
We recommend: Wash and rinse your car first. Prepare your alloy wheels with GLIMMERMANN Non Acidic Wheel Cleaner.
1. Shake product well before use.
2. Spray evenly onto target areas.
3. Leave for approximately 2-5 mins.
4. Rinse using a high pressure washer.
Can be diluted up to 200ml to 1L water.
Health & Safety:
May cause sensitisation by skin contact. Keep out of reach of children. Avoid contact with skin and eyes. Wear gloves and eye/face protection. If swallowed, seek medical advice immediately and show this container or label. Do not mix with other chemicals. If swallowed, rinse mouth with water (only if person is conscious).
Autoglym Magma 500mlRegular price £11.65
Autoglym Magma is part of the Autoglym high performance product range, Autoglym recognise that your vehicle is under constant attack from airborne contaminants, many of these are tiny particles of iron that appear as specs on paintwork and brake dust on wheels, dulling their shine. The active ingredients in Autoglym Magma turn red as they react with these iron particles to safely loosen them from the surface to be easily rinsed away.