Tar & Glue Removers

Trafalgar Tar and Glue Remover is a highly effective formulation for the rapid removal of tar from vehicles and can be also used to remove adhesive residue.

Trafalgar Tar and Glue Remover is also available in 5 Litre.

Directions: Apply to surface using a soft cloth or hand spray unit an allow up to 5 minutes for the deposit to dissolve. Stubborn deposits may require light agitation. Wash off with clean water. Use with care on newly painted surfaces..

Gtechniq W7 Tar and Glue Remover is a full-strength, solvent-based tar and glue remover that is compatible with the Gtechniq coating range.

Tar spots are part of everyday driving and can be extremely difficult to remove without using a specialist product. Whether using W7 on a Gtechniq coated car, or one that is not protected, it will successfully remove contamination without tarnishing the finish.

Directions:

• Shake bottle well before use and wear gloves

• Use out of direct sunlight

• If your car is heavily soiled spray product directly onto tar spots, or if less soiled, spray onto a microfibre cloth and gently wipe the affected area

• Allow to dwell for 1-2 minutes

• Rinse and repeat if necessary

• IMPORTANT: Do not allow W7 to come into contact with plastics, rubber or vinyl – wipe any overspray immediately. It is not suitable for use on PPF, smart repairs or wrapped vehicles

• Store in a cool, dry place

• Use within 12 months of opening

ValetPro Citrus Tar and Glue Remover does exactly what the name describes, specifically designed to shift sticky substances from hard and painted surfaces. This Valetpro product is a refined aliphatic solvent boosted with natural citrus oils, designed to be mild but highly effective in turning tar and glue soluble. This product was designed to be used neat and makes for a gentle tar and glue remover.

Directions: 

1. Spray onto affected area, working a panel at a time. Always use on a dry surface. 

2. Allow to dwell until tar begins to run. 

3. Prime a microfibre cloth  with product. 

4. Wipe of treated area. 

5. Repeat until the contamination is removed. 

6. Rinse down the paintwork with water to neutralise the solvents. 

Please note: If the vehicle has been repainted or had a SMART repair carry out a spot test on an inconspicuous area.

Autoglym Intensive Tar Remover will remove tar, adhesive residues, fuel stains from paintwork and tree sap.

During warm weather the road surface can disintegrate and small specks of tar are flicked onto your bodywork. These spots show up especially well on light coloured cars and can ruin otherwise perfect paint.

Autoglym Intensive Tar Remover can be used on the interior of your car to remove ink, chewing gum, glue residue and oil stains from seats, carpets and hard surfaces.

Pro Tip: Use to remove polish and wax residue from rubber and plastic trim.