Koch-Chemie

Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof).

Cut: 9,0

Gloss: 5,0

Areas of use

Paintwork of cars, commercial vehicles, motor cycles, etc

Recommendations for use

Apply in a crosswise motion with a rotary polisher and a lambskin pad (for sanding traces of 1,200–2,500) or the Heavy Cut Pad (for sanding traces of 2,000–5,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with Micro Cut M3.02 for the best possible finish.

Magic Wheel Cleaner is our powerful, viscous, acid-free rim cleaner that provides innovative performance to mildly and thoroughly clean rims and rim wells. Its reactive component dissolves iron particles with characteristic red discolouration. Special dispersing agents gently remove stubborn dirt from surfaces. The viscous setting ensures that the sprayed-on Magic Wheel Cleaner adheres excellently to the surface. Dirt remains bound and the cleaner does not dry up, even after an extended application time.

Areas of use

Painted alloy wheels, high-quality chromed wheels, steel rims

Recommendations for use

Do not use on hot paints or surfaces or in direct sunlight. Check for suitability and compatibility prior to use. Shake Magic Wheel Cleaner briefly prior to use and spray the rim surface and rim well thoroughly. Depending on the amount of dirt, allow 2 - 5 minutes for Magic Wheel Cleaner to take effect on the rim and then rinse thoroughly using a high-pressure spray

Mild, low-residue lubricant free of coating defcts. Effective for use with clay bars or pads. The excellent lubricity minimises surface scratching during cleaning. Unlike other lubricants it does not leave behind any film. Residue is easy to wipe away with a microfibre cloth. Due to the specialised formula the clay bars or pads do not dissolve and last considerably longer.

Areas of use

Smooth surfaces such as varnish, glass etc.

Recommendations for use

Spray undiluted over the entire area and work the moist surface with a clay bar or pad. Wipe off any residue with a microfibre cloth.

Ready to use surface cleaner for the car, home and workplace. Finger-marks, dust, grease and all other forms of dirt are all swiftly and thoroughly cleaned away. Leaves a residue and streak free clean finish on all smooth surfaces including non-polar materials such as plastics. Also for use with a cleaning gun (such as Cyclone, Art.No. 999021) for great results on ventilation slots, textiles etc. because the formulation does not leave any water marks or chemical residue behind. Has a pleasant scent.

Areas of use

Smooth surfaces, stainless steel, plastic, leather and textiles (textiles with cleaning gun)

Recommendations for use

Spray undiluted onto stained area, let it absorb for a short while and wipe it with a microfibre cloth. Alternatively spray undiluted with the cleaning gun, then switch off the chemical spray and dry with compressed air.

Extra-fine finish sponge for economically and evenly applying sealing products such as the 1K Nano or Lack-Polish grün P1.01. The short height of 23mm creates low torsion forces, excellent handling and the highest level of stability. The optimised reticulation (open cellular structure) and cell count contribute to excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.

Compression hardness: 4

Abrasiveness: 2

Medium abrasive sponge for removing moderate weathering and scratches using the One Cut and Finish P6.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contributes to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.

Compression hardness: 12

Abrasiveness: 5

High-quality special sponge for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 and Micro Cut & Finish P3.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contribute to a high-shine finish and very good hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.

Compression hardness: 10

Abrasiveness: 5

Abrasive sponge for removing strong weathering and deep scratches using the Heavy Cut H9.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contribute to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.

Compression hardness: 17

Abrasiveness: 9

Medium abrasive sponge for removing moderate weathering and scratches using the Fine Cut F6.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contributes to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety.

Compression hardness: 12

Abrasiveness: 5

Innovative machine polish for quickly producing high-gloss surfaces and for effectively removing scratches and grindings from a grit size of P2000 and above with a simultaneous sealing effect.

Cut: 6,0

Gloss: 8,0

Areas of use

Paints on cars, commercial vehicles, motorcycles, etc.

Recommendations for use

Apply using a high-performance orbital polisher and a One Step Pad in a crosswise direction. Apply the high-gloss polish at a medium speed with medium pressure.

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones.

Cut: 3,2

Gloss: 9,5

Areas of use

Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use

For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces.

Cut: 3,2

Gloss: 9,0

Areas of use

Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use

For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure until a transparent film appears, ie, until the aluminium oxide in the polish has completely broken down. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.

Cut: 6,0

Gloss: 7,0

Areas of use

Paintwork on cars, commercial vehicles, motor cycles, etc.

Recommendations for use

Apply the fine polishing compound to the polishing pad (Fine Cut Pad or lambswool pad) and polish the precleaned surface with max. 2.000 rpm crosswise. The cleaning effect can be varied by means of pressure, polishing medium and rpm. At the start of the polishing process we recommend working with greater pressure at a lower speed. In the further course, reduce the pressure and polish to a high gloss at a higher speed. The remaining polish residues can be removed easily with our Profi ultrasonic cut microfibre cloth. Remove any streaks or traces of polish with Micro Cut M3.02.

High-gloss, lotus effect and protection The innovative high-tech conserving wax sets new standards in matters of protection, durability, extreme deep gloss, long-term water repellence (lotus effect), easy-to-clean performance and vehicle drying without micro-beading. The use of polyfunctional reactive components in combination with highest quality care components, which bond firmly with the surfaces as a network, guarantee perfect long-lasting high-gloss protection and improved visibility during rain (beading). Improves with regular use the gloss and protection layer, covers fine scratches and all rubber and plastic parts as well as convertible fabric top materials are protected against fading and embrittlement. ProtectorWax thus makes a considerable contribution to maintaining the vehicle’s value. Can be used as hot, cold and foam wax (mechanically and manually). Achieves optimum drying results even with high conductance values of the service water and with difficult fan geometries. Optimally suited for standard as well as for biological service water treatment plants. Contains no mineral oil hydrocarbons. VDA conform to class A.

Areas of use

Gantry washing systems, wash systems, self-service carwashes, foam guns, etc.

Recommendations for use

Apply undilutedwith dosing pump undiluted or in a ratio of up to 1:2. Recommended dosage per car: hot/cold wax: 13-19 ml. Foam wax: 13-19 ml. Premium wax: 16-23 ml. VDA conform to class A. Manual use: Pour approx. 30ml ProtectorWax into 1l water and apply it to the clean, still wet vehicle using a foam sprayer or pump dispenser and let it soak in. Rinse the product thoroughly using a pressure washer to avoid stains. If applying using a foam gun, adjust the pre-dilution accordingly. Pat dry any residual water Only mix the product for one application and do not store.

An all-round talent for all smooth and painted surfaces (vehicle paintwork, painted wood, glass, plastic parts, dashboards, painted furniture and musical instruments, stainless steel surfaces, etc.). Cleans, cares and seals in a single step. Fingerprints and light dirt are removed quickly and easily. Surfaces are left with a brilliant shine, high surface smoothness and good hydrophobic properties. Quick Finish runs off quickly without leaving streaks and is therefore easy to apply. Previously applied polishes and waxes are retained. It is particularly well suited to quick finishing of exhibited goods in showrooms or at trade fairs, as well as for quick valeting of vehicles. Also suitable for use in painting applications.

Areas of use

Vehicle paintwork, painted wood, glass, plastic parts, consoles, painted furniture and musical instruments, stainless steel surfaces, etc.

Recommendations for use

Spray evenly on the surfaces to be treated and polish off with a Profi microfibre cloth.

Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,500 grain. With its extremely homogeneous abrasive grain, Heavy Cut 8.02 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof). With Daimler approval.

Cut: 8,5

Gloss: 5,0

Areas of use

Paintwork of cars, commercial vehicles, motor cycles, etc

Recommendations for use

Apply in a crosswise motion with a rotary polisher and a lambskin pad (for sanding traces of 1,500–2,500) or a polishing pad (for sanding traces of 2,500–5,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with Hochglanz-Antihologramm-Politur for the best possible finish.

Premium leather care with a natural semigloss finish. For revitalising and preserving smooth leather, suede and perforated leather materials on vehicle seats, sofas, etc. Leather Star is easy to use and creates a pleasant fragrance, a colour intensifying appearance and a supple and soft feel, without causing undesirable slipperiness. The use of premium active ingredients from cosmetics makes the leather supple and provides prolonged protection against new dirt and becoming brittle.

Areas of use

Smooth leather, suede and perforated leather materials (motor vehicles, furniture, etc.)

Recommendations for use

Clean the dirt first with a suitable cleaner (eg Pol Star), wipe with damp cloth and dry thoroughly. Shake Leather Star before use, apply evenly and extensively to the leather surfaces with a sponge or soft microfibre cloth and leave to dry. Remove any excess with a soft cloth

Silicone oil-free premium product in the area of plastic care products. Maintains and protects over months and is extremely UV-stable. The treated parts regain their original new semi-matt appearance thanks to a special care components system (micro-emulsion), which bonds firmly with the treated surface. Stops door seals from freezing. The extremely long service life, fast and simple use and a pleasant fragrance make Plast Star siliconölfrei into an unbeatable product. Optimally suited for tyres and rubber parts as well. With Daimler approval.

Areas of use

External plastic and rubber parts, tyres, door seals, etc.

Recommendations for use

Use a sponge to apply evenly to the clean, dry surfaces, rub in thoroughly and leave to dry completely.

Sprayable special product for eliminating unpleasant smells in vehicles, caravans, boats, sanitary, residential and commercial areas. The odour molecules of tobacco smoke, animal smells, decomposition processes, etc. are encapsulated and thus made ineffective. Fresh Up deodorises the treated rooms, textiles and areas with a fresh fragrance. For odour control of extreme problem vehicles we recommend in addition the use of our KC-Refresher.

Areas of use

Textiles, upholstery, roof liners, air freshener

Recommendations for use

First remove dirt and sources of odours through thorough cleaning. Then spray the textiles, surfaces or rooms sparingly

Premium care emulsion for deep pore cleaning and freshening plastic and rubber parts such as consoles, interior trim, seals, etc. Top Star creates a long-lasting, semigloss, natural sheen and protects the surface permanently against new dirt and UV radiation. Special active ingredients keep plastic supple, have an antistatic effect and provide a new and attractive look. With fresh fragrance. With Daimler approval.

Areas of use

Console, interior trim, rubber seals, etc.

Recommendations for use

Spray onto a soft sponge and apply evenly to the surfaces. Leave to dry and where necessary wipe with a microfibre cloth.

The premium product in the area of plastic care products. Maintains and protects over months and is extremely UV-stable. The treated parts regain their original new semi-matt appearance thanks to a special care components system (wax-silicone dispersion), which bonds firmly with the treated surfac. Stops door seals from freezing. The extremely long service life, fast and simple use and a pleasant fragrance make Plast Star into an unbeatable product. Optimally suited for tyres and rubber parts as well.

Areas of use

External plastic and rubber parts, tyres, door seals, etc.

Recommendations for use

Shake well before using. Use a sponge to apply evenly to the clean, dry surfaces, rub in thoroughly and leave to dry completely.

Effective neutral cleaner with protection formula for leather, alcantara and textiles such as upholstery and carpets. The dirt is removed from deep in the fibres by fine-pored foam lamellas and can be wiped up with a wet/dry vacuum cleaner or a damp cloth. Does not leave any water marks and preserves the original waterproofing. The conserver protects the parts against becoming dirty again quickly.

Areas of use

Leather, alcantara and textiles, etc.

Recommendations for use

Depending on the dirt accumulation, apply a 1:5 to 1:20 solution with a spray bottle, microfibre mitt or similar and allow to react for a short time. Work in carefully with a sponge or microfibre cloth in the direction of the main fibres. Wipe up product residues and foam with a damp cloth or a wet/dry vacuum cleaner. For use in spray extraction and other carpet/upholstery cleaners we recommend the addition of Kocentschäumer defoaming agent.

Special product for the quick removal of adhesives (eg sticker residues), rubber, tree resin, spray mist, ink stains, oil, greases, tar, etc. from solvent-resistant surfaces such as paintwork, glass, ceramic, metal, etc. Evaporates quickly and without leaving residues and contains no halogenated hydrocarbons. With Daimler approval.

Areas of use

Solvent-resistant surfaces such as paintwork, glass, ceramic, metal, etc.

Recommendations for use

Apply to the stains undiluted with a dry absorbent cloth and rub off.

Highly concentrated, phosphate- and solvent-free, alkaline universal cleaner. Universally usable for the areas of workshop floor and industrial cleaning, interior and exterior cleaning of cars and trucks and engine cleaning thanks to its enormous dirt and oil carrying capacity. Special corrosion inhibitors ensure high material compatibility with regard to sensitive components such as, eg, anodised aluminium. For use in spray extraction and other carpet cleaning devices we recommend the addition of Kocentschäumer foam inhibitor. Optimally suited as well for biological service water treatment plants. Quick-separating and tested in accordance with ÖNORM 5105 (test concentration 10% solution). VDA conform to class A: reaction time max. 5 min, max. application concentration 1:3

Areas of use

Cars, recreational and commercial vehicles, workshop and industrial floors, machinery, etc.

Recommendations for use

Depending on the dirt accumulation: cleaning vehicle exteriors and engines use a 1:5 to 1:30 solution. Apply over whole surface, allow to react for a short time and use a high-pressure cleaner to rinse off thoroughly. Cleaning vehicle interiors and textiles use a 1:10 to 1:20 solution. Remove product resides with a damp cloth or a wet/dry vacuum cleaner. Workshop and industrial floors use a 1:40 to 1:120 solution. VDA conform to class A: reaction time max. 5 min, max. application concentration 1:3

Phosphate and NTA-free vehicle shampoo for gantry washing systems, wash systems and hand washing. The combination of anionic and non-ionic surfactants guarantees mild and thorough cleaning. Optimally suited as well for biological service water treatment plants. VDA conform to class A.

Areas of use

Gantry washing systems, wash systems, hand washing, etc.

Recommendations for use

Use dosing pump to apply undiluted or diluted 1:10. Recommended dosage per car: Shampoo: 6-10 ml. Hand washing: 1:150. VDA conform to class A.

Lack-Polish blau maintains and refines new to medium weathered gloss paintwork. Lack-Polish blau creates an optimum streak-free mirror finish both mechanically and manually. The treated surfaces are protected over a long period. Depending on the degree of weathering of the paintwork, various pad hardnesses support the cleaning process and in this way optimise the cleaning performance. Lack-Polish blau is ideally suited for all types of paint.

Cut: 2,0

Gloss: 9,3