Sealants

With Alchemy Duck Tail protecting your paint is as simple as spray on, rinse off, Alchemy Car Care Duck Tail is a hydrophobic spray on wet coat that is simple to use and gives up to 4 months protection with a single application.

After applying Alchemy Duck Tail, you’ll be willing it to rain so you can watch the incredible water beading. And when it’s not raining you can enjoy the shine and gloss of your wax or sealant that is being protected by this Alchemy wet coat.

Duck Tail is safe to use on almost every exterior surface of your car.

Available in 500ml and 5L

Directions:

Simple application -spray on to clean wet paint and immediately pressure washer off.

Duck Tail should only be used on standard finishes only and not matte paint and wraps.

Chemical Guys Blacklight is a specialty hybrid glaze and sealant which is pure eye-candy for your black and dark-coloured vehicles. Use Chemical Guys Black Light to add tons of extra deep wet shine, fill minor swirls and scratches, and clean minor stains and imperfections.

Treat your vehicle with a Chemical Guys clay bar service to remove any rough contamination, spread a coat of Black Light, then “lock in” the candy sparkle shine with a layer of durable sealant or wax. Combined with Chemical Guys Butter Wet Wax or JetSeal, Black Light helps protect paintwork against pollution, brake dust, industrial fallout, water spots, and harmful UV solar rays. Black Light is perfect for black and dark colour paint finishes.

Try it on maroon, burgundy, green, gunmetal gray, blue, brown, or purple paint finishes. Professionals and enthusiasts regularly skip intense and time-consuming polishing steps with a coat of Black Light. The intense gloss enhancers and micro-refined oils in Black Light help fill minor swirls and scratches in vehicle paintwork, reducing their visibility and enhancing a mirror-like shine. Black is renowned as one of the most beautiful and elegant automobile colours. It may require extra care and attention, but when black paintwork is done right with a coat of Chemical Guys Black Light Hybrid Radiant Finish, everybody looks.

Sonax Xtreme Spray and Seal Spray-on Sealant, a complete vehicle can be lastingly sealed, protected and rendered dirt repellent in just 5 minutes during the car wash! The colour depth of the paintwork surface is enhanced in the process and a mirror shine produced and an excellent water and dirt repellent effect is produced in seconds! AIso ideal for long lastingly sealed paintwork to freshen up the water repellent effect.

Directions for use: Wash vehicle and rinse thoroughly. Shake Bottle. Evenly spray the wet vehicle (approx. 4 - 6 sprays per m2). Rinse immediately with plenty of water and dry the vehicle.

Chemical Guys Hybrid V7 is the world's first hybrid spray formulated with rapid bond technology that delivers superior optical clarity with ultimate protection. Developed using the latest in nano-spec engineering Chemical Guys Hybrid V7 combines spray sealant technology with optical grade high gloss polymers to create a product that can only be described as amazing.

Hybrid V7 utilises rapid bond technology to deliver a transparent high gloss finish while providing long lasting UV protection to paint, glass and virtually all exterior surfaces. Using nano technology, Hybrid V7 is able to bond an disappear into the surface revealing a finish with the superior high gloss shine that professional demand. Chemical Guys Hybrid V7 is the ultimate gloss enhancing spray sealant that delivers flawless shine while providing the highest level of protection.

Chemical Guys spent over 5 years developing optical grade detailing technology to allow maximum shine on any surface. Hybrid V7 is designed to bring out the true beauty of your paintwork by utilized transparent polymers for a high gloss shine that professionals demand. The transparent polymers use Chemical Guy’s patented rapid bond technology to blend into the surface for protection on the nano-spec level. Hybrid V7 removes fingerprints, dirt, dust, and contamination while leaving behind a protective sealant barrier that protects against rain, road debris and water spots. We wanted to design a product that literally disappears into the paintwork creating a smooth surface with a high gloss finish that can only be described as stunning.

The Chemical Guys patented optical grade detailing technology is designed to reflect the light source in the purest form for extreme shine. Application has never been easier. Just a few sprays of Hybrid V7 on a microfiber towel and your vehicle can be free of dirt and dust while protected from the elements.

WHY BUY THIS PRODUCT?

• High gloss shine on any color paintwork

• Optical select clarity on virtually any exterior surface

• Rapid bond technology for the ultimate protection

• Advanced long lasting UV protection

• Transparent polymers enhance metallic paintwork

• Makes detailing faster and easier

• Removes dirt, dust, fingerprints and water spots

Autoglym Polar Seal is a protective coating that has been specially formulated for application through a pressure washer with a foam gun.  It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface, which reduces the time it takes to dry the car. Simply spray onto a clean, wet vehicle, rinse off and dry to leave behind a high gloss finish.  

Auto Finesse Caramics Gloss Enhancer is the quick and easy way to leave behind a slick, shiny and protected finish, with nothing more than a spritz and a wipe. Just like our Caramics Paint Protection Kit, Caramics Gloss Enhancer is designed to be extremely user friendly, offering a professional finish without the need for advanced training in ceramic coating technology.

Simply apply the highly concentrated solution to a fresh, clean car on every maintenance wash, to instantly add an extra layer of Si02 ceramic protection with advanced water beading capabilities.

Caramics Gloss Enhancer can an also be used as a handy quick detailer to eliminate watermarks, fingerprints and light soiling. A quick and effective hydrophobic top up for all ceramic coated paint surfaces, and an essential for keeping your car looking amazing for longer.

Change the way you wash your car with Auto Finesse Aqua Coat, the quick and easy way to apply long lasting protection, with enhanced water beading to all exterior surfaces. Aqua Coat adds a protective layer of Si02 coating to all exterior surfaces right at the wash stage. Simply wash your vehicle as normal, rinse then apply a fine mist of Aqua coat to the vehicle whilst wet, rinse very well once again. You will see before your very eyes the instant effects of Aqua Coats hydrophobic characteristics, that last wash after wash for up to 3 months. Dry your vehicle as normal and you're done, it really is that simple to apply its initial coat, add subsequent top up coats when necessary.

P&S Detail Products Bead Maker now makes paint protection easier and faster than ever before. Bead Maker's unique formulation allows for quick spray application. This time saving product uses binding polymer monomer technology to produce a water beading, brilliant, long lasting finish. Bead Maker may be applied to wet or dry vehicles and is safe to spray all exterior surfaces. Bead Maker also does include UV Protection - we use a combination of a UV filter and UV stabilizers. What makes Bead Maker different is the surface migrating molecule that attaches to the paint surface of a vehicle. Once attached this molecule cross-links and polymerizes on the surface thus building a hydrophobic durable layer of protection. Cure time is essentially two hours depending upon ambient conditions

Wrap Detailer cleans and protects glossy vinyl wraps, shiny printed graphics, and clear bra protection films on all vehicles. The synthetic detailer safely removes dirt, dust, road grime, and bird droppings without causing any scratches or swirls on the surface. Wrap Detailer is blended with spray sealant technology to protect shiny vinyl wraps and graphics on all vehicles. UV solar blockers prevent vinyl wraps and graphic designs from fading, and help prevent yellowing and discolouration on clear bras.

Harsh weather conditions can cause premature wear on all stick-on wraps and graphics. The sprayable detailer conditions and protects the surface to prolong the life of vinyl car wraps, clear protection films, and printed graphic kits. Wrap Detailer safely removes dirt and debris from custom wraps and graphics without causing swirls or scratches. Custom vehicle wraps are sensitive surfaces that require special care and attention. UV solar rays, water spots, road grime, and contamination can stain and ruin wrapped surfaces.

Wrap Detailer is designed to maintain and condition the surfaces while protecting vinyl wraps and graphic kits from stains, swirl marks, and aging. Simply spray and wipe dirt away for a brilliant shine. Works great on OEM and aftermarket vinyl graphics on all vehicles. Wrap Detailer is the perfect choice to clean, shine, and protect all vinyl wrapped surfaces and graphics.

WHY BUY THIS PRODUCT?

• Designed for clear bras, glossy and shiny wraps, and printed graphics
• Removes dirt, dust, and fingerprints
• Advanced UV blockers protect surfaces
• Prevents premature aging and wear
• Sprayable formula wipes dirt away without scratching
• Prevents swirls and scratches on wraps
• Extends the life of clear, glossy, and shiny vinyl wraps and printed graphics
• Spray sealant technology protects through all seasons
• Works on OEM and aftermarket films, graphics, and wraps

Activate Instant Wet Finish Shine and Seal protects against the harsh elements and enhances a brilliant shine with an easy-to-use spray formula. The innovative sealant is formulated with Reactive Fusion Technology for reduced application time, improved durability, and extended protection.

Activate Shine & Seal creates a slick surface that dirt, pollution, and water simply slide from. Just shake, then spray on weatherproof protection and bright shine for every season. The slick formula sprays and cures quickly to bond to any paint color. Protect exterior paintwork, glass, clear optical plastics like headlights and tail lights, wheels, polished metals like chrome and stainless steel, and much more.

Reactive Fusion Technology combines extreme gloss enhancers with premium white carnauba wax and synthetic sealants to create a superior shine. Protect any vehicle with Activate Shine and Seal: the next generation of spray sealant technology.

WHY BUY THIS PRODUCT?

• Advanced spray sealant synthetic wax formula
• Reactive Fusion Technology for fast application and bonding times
• Blended with gloss enhancers and premium carnauba wax
• Maximum shine with minimal effort
• Durable weatherproof protection lasts for months on end
• Repels water, pollution, contamination, and more
• Works on all colors
• Also available in 4 ounce and 64 ounce (1/2 Gallon) sizes

New from Bouncer's is Bead Juice. A Nano Tech Exterior Protection Sealant that can be applied either wet or dry. - Bead Juice is perfectly safe to use on any other coating or existing wax layers. - Can also be used on all exterior inc glass/plastics/alloys etc.  Keep your car protected and looking cleaner for longer.

Dry method.
As you would a Quick Detailer, very light mist onto a panel, spread well with soft buffing cloth, turn over cloth and buff again if necessary. Done.
Wet Method.
After your usual wash method i.e rinse after shampoo, spray the product onto the wet panel and rinse off straightaway. - The product is very active, so you can 'level' out the product as well by spreading with a soft MF or sponge applicator, then rinse off - Dry car normally.
Either way, you are looking at 3-4++ months strong protection. Providing strong beading and sheeting, Bead Juice is certainly a product to have, its so easy to use, its almost 'cheating'

To maintain protection on your vehicle. a wax safe / PH7 pure shampoo is recommended.  Our Shampoo 'Slick Mick' will compliment this product to keep your car, looking its best

 

Available in 500ml and 1 Litre.  Both come supplied with Trigger Head.

This product is ready to use and does not require dilution.

 

Warning:

Bead Juice is an Active spray sealant. On wet application it is imperative to fully rinse and remove product fully via pressure washer and not to allow to linger or allow to dry on paintwork. Use sparingly as over application and or product not fully removed can result in the product leaving a residue behind. - Test on a small area first. If the paint does show areas of residue, this can be removed using a micro polish on affected areas.

Gtechniq C2 Liquid Crystal is the revolutionary way to make your car, boat, plane or RV shine and stay clean longer, thanks to Gtechniq’s Smart Surface Science.

With C2 Liquid Crystal you get instant, effective protection from UV and dirt.

Directions:

• Shake well before use

• Do not apply in direct sunlight, and wear gloves

• Spray onto a clean microfibre cloth, wipe onto the car a panel at a time and buff with second, clean cloth

• Layer for increased gloss and protection

• C2 can be used as a drying aid by spraying onto a wet surface, a panel at a time, and drying with an microfibre cloth

• Store in a cool, dry place

• Once opened use within 12 months

MB14 Paint seal pro Nano polymer sealant  is one of our most widely regarded products amongst detailers and hobbyists alike.. Formerly known as MB14 Paint Sealant, with a slight improvement, is a synthetic polymer paint sealant that provides a tough protective coating on all automotive paints and glass, against the elements.

Surfaces are treated to amazing hydrophobic skin like properties and a hard lustrous gloss that alone can last upwards of 6 months plus with correct maintenance. This makes routine washing easier and less time consuming. Paint seal pro provides excellent long lasting protection against bird droppings, bug splatter, road salt and harmful UV rays. Ideal as a Stand alone protective coating or as a base layer for our show wax.

Chemical Guys BLITZ is one step spray protectant for a high gloss shine on any painted finish. BLITZ is not a quick detail spray, its a full-strength sealant and wax combo in an easy-to-use spray formula! BLITZ is for the perfectionist on the go; not every car enthusiast has enough time to properly seal and protect their vehicle against the elements. Chemical Guys formulated BLITZ to quickly provide strong protection with brilliant gloss and shine in all types of weather. The innovative new formula sprays quickly for full body protection in just minutes. The hybrid synthetic and natural wax spray is perfect for adding extra protection and shine after a wash. Use BLITZ to protect your vehicle from pollution, sun damage, fading, water spots, stains, bugs, tree sap, industrial fallout, brake dust, rail dust, and more! Use BLITZ on any vehicle. Detailers regularly detail their customers’ cars, trucks, motorcycles, boats, RVs, and anything that rolls on wheels with BLITZ. Refined gloss enhancers and pure white carnauba wax add intense shine to all colors and paint types: red, white, black, blue, silver, green, single-stage, and clear coat finishes. Properly-sealed cars stay cleaner for longer, and cars treated with BLITZ repel dust and dirt to stay clean for weeks between washes. Pick up a bottle of Chemical Guys BLITZ, and simply spray on a coat of strong protection with brilliant glossy shine on any paint colour.

Chemical Guys BLITZ combines two separate wax coatings into one sprayable product. Now anyone on a time constraint can simply spray on a coat of wax for unbelievable shine and protection. The synthetic wax formula of BLITZ uses a nano tech cross-linking acrylic formula that virtually blends into your paintwork, binding hard for durable protection against the elements. But for detailers who love a natural carnauba wax glow, Chemical Guys blended BLITZ with all-natural refined white Brazilian carnauba wax. Only carnauba enhances the warm, wet, glowing shine that car enthusiasts have known and loved for over 100 years. Now anyone can simply spray on BLITZ for the strong protection against the elements from manmade synthetic waxes, and the beautiful radiant shine of natural car waxes.

WHY BUY THIS PRODUCT?

• Spray wax and shine in seconds

• Sprayable natural and synthetic wax coating

• Protects against pollution, UV sunlight, and the elements

• Enhances intense gloss and brilliant shine

• Easy to apply, remove, and enjoy

• Refined formula for easier spreading and faster removal

• More durable wax formula for longer-lasting protection

• Added gloss enhancers for brighter shine and wetter reflection

Chemical Guys JetSeal Matte is the advanced synthetic wax sealant for matte automotive finishes. Formulated with nano-tech polymers, JetSeal Matte protects and enhances matte and satin paintwork, vinyl wraps, and clear bras for up to 12 months with just one coat.

The innovative Chemical Guys formula uses UV protection technology to repel harmful solar rays that fade and discolor matte and satin finishes. JetSeal Matte is the world’s first synthetic wax sealant developed for matte paintwork and vinyl wraps. Advanced sealant formula helps protect against water spots, staining, fading, contamination, and road grime to keep matte surfaces silky and satiny.

JetSeal Matte bonds directly to the pores of the surface using nano polymers, and creates a durable shield against the elements. The easy-to-use formula enhances the crisp satin sheen that hardcore enthusiasts love about matte finishes. JetSeal Matte protects any matte color so it can look its best for years to come. JetSeal Matte was derived from the fan-favorite Chemical Guys JetSeal, and redeveloped over 4 years to produce the perfect sheen on matte paints and wraps. JetSeal Matte is the perfect protectant for matte paintwork, wheels, power coat, and vinyl-wrapped surfaces.

Enhance and protect the bold crisp sheen of any matte, satin, and flat finish with Chemical Guys JetSeal Matte protectant sealant.

WHY BUY THIS CHEMICAL GUYS PRODUCT?

• Durable protection against the harshest elements

• Designed specifically for matte finishes

• Synthetic wax formula lasts longer for better protection and shine

• Helps repel harsh UV solar rays, pollution, water spots, bug and bird residues, and road grime

• Great for matte paintwork, vinyl wraps, and matte clear bra finishes

• Helps prevent fading, staining, and discoloration

• Spread with any premium foam or microfiber applicator pad

• Lasts up to 12 months with just one application

• Easy to use formula: spread on, then buff off

Chemical Guys White Light is a hybrid premium gloss enhancer and sealant in one, designed to give the deepest wettest shine on white, silver and lighter coloured vehicles. Chemical Guys devoloped White Light from the ground up as a glaze that offered the deepest shine possible whilst at the same time giving large amounts of protection for the paint. This combination of glaze and sealant, that quite possibly makes this the perfect base coat for futher layers of waxes or sealants on lighter coloured paints.

Chemical Guys White Light uses premium ingredients that penetrate deep uses premium ingredients that penetrate deep to reduce the visibility of minor swirls and scratches. White Light was developed using a fully synthetic nano-blend formulation enriched with advanced gloss enhancers. The innovative formula cleans light colored paintwork to remove yellowing and discoloration. UV solar blockers protect light colored paintwork for the brightest shine.

The unique gloss enhancer can be used by hand or machine. Chemical Guys proprietary blending technology allows White Light to deliver a slick radiant finish unlike anything else.

WHY BUY THIS PRODUCT?

• Gloss enhancer with brilliant shine

• Creates a wet, bright finish

• Perfect for white and light colors

• Safe for all colour finishes

• Easily applied by hand or machine

• Often used in conjunction with Hybrid V7 and White Wax

• Perfect for creating a show-winning shine

Chemical Guys JetSeal is a durable paint sealant that protects against the harshest elements. Chemical Guys developed JetSeal for the aerospace industry, which demanded strong protection for jet airplanes flying in extreme hot and cold temperatures. The revolutionary nano-polymers in JetSeal bond directly to the fine pores inside paintwork for a durable bond.

A coat of JetSeal helps repel pollution and contamination, enhance a brilliant shine, and preserve a smooth finish. The new extra-durable JetSeal formula protects cars for up to one full year with just one application. The full synthetic formula enhances a brilliant glassy shine that enthusiasts and detailers love for every vehicle color. Traditional natural carnauba waxes are loved for their warm shine and protection capabilities, but they only last a couple months at a time. Extreme weather and temperatures rapidly break down natural waxes, and leave cars unprotected against the elements that dull shine.

Chemical Guys JetSeal is a manmade synthetic wax that takes paint protection to the next level. JetSeal bonds directly to the surface, creating a strong shield against water spots, contamination, road grime, and UV sunlight. Innovative UV protection technology helps reject harmful solar rays and protect paintwork against fading and discoloration. JetSeal is perfect for any exterior paintwork, glass, clear optical plastics, polished metals, carbon fiber, and any other glossy or clear material.

Choose the 21st century standard of durable protection with the brilliant shine of Chemical Guys JetSeal.

WHY BUY THIS CHEMICAL GUYS PRODUCT?

• Durable protection against the harshest elements

• Synthetic wax formula lasts longer for better protection and shine

• Helps repel harsh UV solar rays, pollution, water spots, bug and bird residues, and road grime

• Enhances high gloss shine on every paint color

• Protects and enhances glossy paint finishes, glass, clear optical plastics, polished metals, carbon fiber, and more

• Easy to use by hand or machine application

• Spread with any premium foam or microfiber applicator pad, or soft finishing pad and dual action polisher

• Lasts up to 12 months with just one application

• Easy to use formula: spread on, then buff off

Poorboy's World EX Sealant is the best and easiest way to bring out the brilliance in your vehicles appearance. Poorboy's EX is a combination of Amino functional resins and the finest Brazilian Carnauba wax. This gives unbeatable protection and shine, with ease of use. Poorboy's EX Sealant can be layered and is compatible with most other products, and can be used in the sun or shade.

Directions -Surface should be new or totally cleaned and polished before use. We recommend the use of Poorboy's Professional Polish or SSR1 before application of EX Sealant with carnauba wax. Place a small amount of EX on a damp, soft applicator sponge. Spread the product evenly over surface one section at a time. Let the EX Sealant dry to a light haze, or 30 to 60 minutes for a deeper shine and then buff of with a soft microfibre cloth. If you are using Poorboy's EX in the hot summer sun, do oner section at a time and then remove immediately. For use with a machine use foam finish pads, apply evenly and follow the previous instructions then remove with a soft microfibre cloth by hand, buffing to a long lasting and brilliant shine. We recommend using QD+ for an occasional Carnauba enhancement and to extend the life of Poorboy's EX Sealant.

Poorboy's EX-P is a pure sealant that easily brings out the brilliance and clarity of new and well-maintained vehicles. EX-P is an Amino Functional Resin which combines ease of use with unbeatable protection and shine. EX-P can be used in sun or shade. Especially good on light coloured and metallic flake colours.

Directions -Surface should be new or totally cleaned and polished before use. We recommend the use of Poorboy's Professional Polish or SSR1 before application of EX Sealant with carnauba wax. Place a small amount of EX on a damp, soft applicator sponge. Spread the product evenly over surface one section at a time. Let the EX Sealant dry to a light haze, or 30 to 60 minutes for a deeper shine and then buff of with a soft microfibre cloth. If you are using Poorboy's EX in the hot summer sun, do oner section at a time and then remove immediately. For use with a machine use foam finish pads, apply evenly and follow the previous instructions then remove with a soft microfibre cloth by hand, buffing to a long lasting and brilliant shine. We recommend using QD+ for an occasional Carnauba enhancement and to extend the life of Poorboy's EX Sealant.