Wheels | 16"

The AVA Reno is a 10 spoke alloy wheel finished in black chrome and is  available in 4 stud 15" and 5 stud 16". The Ava Reno is a cross drilled alloy wheel and will have a multi-fit look.

Size : 16" x 7"

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store.

3SDM monoblock cast wheels are available in a number of sizes 16″ to 22″ depending on design. They are made from prime alloy ingot A356.2 aluminium. Tested to destruction at  R&D facilities, all 3SDM wheels pass rigorous Impact Test, Radial Fatigue, and Corner Fatigue before they go in to production.

3SDM polished face wheels aren’t the normal diamond cut that you see everywhere, they are “superfinished” on special turning centres so the radial lines are almost invisible before going through a seven stage aerospace pretreatment. 3SDM cast wheels have a powder clear coat on all gloss finishes.

3SDM monoblock cast wheels are available in a number of sizes 16″ to 22″ depending on design. They are made from prime alloy ingot A356.2 aluminium. Tested to destruction at  R&D facilities, all 3SDM wheels pass rigorous Impact Test, Radial Fatigue, and Corner Fatigue before they go in to production.

3SDM polished face wheels aren’t the normal diamond cut that you see everywhere, they are “superfinished” on special turning centres so the radial lines are almost invisible before going through a seven stage aerospace pretreatment. 3SDM cast wheels have a powder clear coat on all gloss finishes.

The AutoStar Blade is a stunning deep dish wheel with a classy gunmetal finish and deep polished dish, with retro styling and good sizing to suit a wide variety of vehicles from JDM to Euro.

As always with AutoStar, made in a TUV approved factory and tested to VIA standards.

Wheels come complete with free fitting kit

With a unique 'Zero Lip' design and timeless styling the Minus can complete a retro car's look or give a old skool feel to a modern car.
Combining 16" x 7.5" sizing with a relatively high offset for ease of fitment, the Autostar Minus is set to take the scene by storm. 
Fantastic Gold or Gunmetal finish to the face with a polished lip, the Minus is a unique looking wheel on the UK Market - stand out from the crowd!

As always with AutoStar, made in a TUV approved factory and tested to VIA standards..

Wheels come complete with free fitting kit

The Calibre Freeway is a load rated alloy wheel available in various van fitments. The Freeway is finished in an elegant Gloss Gunmetal with polished highlights.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Highway is a load rated alloy wheel available in 16", 17" and 18" in various van fitments. The Highway is finished in an elegant matt black with matt polished highlights.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Outlaw is a robust, OEM inspired load rated alloy wheel design ideal for 4x4's including the landcover defender.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Pace alloy wheel is a simple yet stylish five spoke design ideal for a wide range of cars.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Pace alloy wheel is a simple yet stylish five spoke design ideal for a wide range of cars.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Vintage is a retro style mesh alloy wheel with a polished dish available in various sizes, colours and fitments.

The 16" Calibre Vintage is available in 7" or 8" with staggered sets available.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Calibre Vintage is a retro style mesh alloy wheel with a polished dish available in various sizes, colours and fitments.

The 16" Calibre Vintage is available in 7" or 8" with staggered sets available.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Get in touch for availability and wheel and tyre package deals which are available in store

The Dare RS is a classic retro alloy wheel design with a deep polished dish and rivets giving the appearance of a two piece wheel. The Dare Rs is available in a variety of colours, sizes and fitments.

These wheels come complete with fitting kit including chrome bolts/nuts, spigot rings and chrome valves. Wheel and tyre packages also available.

The Dare RS is a classic retro alloy wheel design with a deep polished dish and rivets giving the appearance of a two piece wheel. The Dare Rs is available in a variety of colours, sizes and fitments.

These wheels come complete with fitting kit including chrome bolts/nuts, spigot rings and chrome valves. Wheel and tyre packages also available.

The Dare RS is a classic retro alloy wheel design with a deep polished dish and rivets giving the appearance of a two piece wheel. The Dare Rs is available in a variety of colours, sizes and fitments.

These wheels come complete with fitting kit including chrome bolts/nuts, spigot rings and chrome valves. Wheel and tyre packages also available.

The Dare RS is a classic retro alloy wheel design with a deep polished dish and rivets giving the appearance of a two piece wheel. The Dare Rs is available in a variety of colours, sizes and fitments.

These wheels come complete with fitting kit including chrome bolts/nuts, spigot rings and chrome valves. Wheel and tyre packages also available.

The Dare RS is a classic retro alloy wheel design with a deep polished dish and rivets giving the appearance of a two piece wheel. The Dare Rs is available in a variety of colours, sizes and fitments.

These wheels come complete with fitting kit including chrome bolts/nuts, spigot rings and chrome valves. Wheel and tyre packages also available.

The Lenso BSX is a traditional mesh style alloy wheel with hints of retro three piece alloy wheel styling. The BSX is a available in various sizes, fitments, colours, offsets and widths to ensure this alloy wheel is available in perfect combination.

In 16" the Lenso BSX is also available  in 9" wide in silver only, this price is for four 7.5" wide wheels but if you require the wider 9" option or a staggered set please get in touch for availability and prices.

Includes free fitting kit consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

The Lenso PTB is a black and polished alloy wheel exclusively manufactured in 16" 6x139.7 for older Suzuki. The PTB features traditional offroad 4x4 styling with concave spokes and a large protruding centre cap enhanced by the wheels bright polished and black finish.

Centre Bore : 110

Includes free fitting consisting of chrome bolts/nuts, centre caps and badges, spigot rings if necessary and chrome valves.

Wheel and tyre packages also available at an additional cost with fitting and balancing while you wait  Call us on 028 2564 8935 to arrange wheel fitting.

The Stuttgart ST1 is a very retro alloy wheel, using a cross-hatched centre section combined with a split-rim design. The chromed outer rim has a deep lip, making it perfect for the Euro look with small but very wide rims.

Every JBW AT1 alloy wheel is manufactured to the highest industry standards. JBW wheels are manufactured to ISO16949 standards and have been JWL (Japan Light Alloy Wheel Standard) and VIA (Vehicle Inspection Association of Japan) approved.

Every JBW alloy wheel is made under licence exclusively for us and passes through multiple manufacturing stages,

• 3D CAD Production

• Wheel Mould Production

• Wheel Casting

• Heat Treatment

• Machining

• Paint & Finish

After the wheels have passed through each stage of manufacture and quality control (ensuring superior craftsmanship, sleek and stylish designs and finishes), they are boxed and shipped to our warehouse here in the U.K. ready to be despatched to our customers with a lifetime structural warranty and a 12-month warranty on the paint finish (not applicable to hand polished finishes).

Every JBW Sawtooth alloy wheel is manufactured to the highest industry standards. JBW wheels are manufactured to ISO16949 standards and have been JWL (Japan Light Alloy Wheel Standard) and VIA (Vehicle Inspection Association of Japan) approved.

Every JBW alloy wheel is made under licence exclusively for us and passes through multiple manufacturing stages,

• 3D CAD Production

• Wheel Mould Production

• Wheel Casting

• Heat Treatment

• Machining

• Paint & Finish

After the wheels have passed through each stage of manufacture and quality control (ensuring superior craftsmanship, sleek and stylish designs and finishes), they are boxed and shipped to our warehouse here in the U.K. ready to be despatched to our customers with a lifetime structural warranty and a 12-month warranty on the paint finish (not applicable to hand polished finishes).

Every JBW Sawtooth alloy wheel is manufactured to the highest industry standards. JBW wheels are manufactured to ISO16949 standards and have been JWL (Japan Light Alloy Wheel Standard) and VIA (Vehicle Inspection Association of Japan) approved.

Every JBW alloy wheel is made under licence exclusively for us and passes through multiple manufacturing stages,

• 3D CAD Production

• Wheel Mould Production

• Wheel Casting

• Heat Treatment

• Machining

• Paint & Finish

After the wheels have passed through each stage of manufacture and quality control (ensuring superior craftsmanship, sleek and stylish designs and finishes), they are boxed and shipped to our warehouse here in the U.K. ready to be despatched to our customers with a lifetime structural warranty and a 12-month warranty on the paint finish (not applicable to hand polished finishes).