Gtechniq EXO v5 Ultra Durable Hydrophobic Coating Overview
Gtechniq EXO v5 Ultra Durable Hydrophobic Coating is a high-performance last surface protection (LSP) designed to deliver outstanding gloss, water repellency and dirt resistance with an easy, one-layer application. Offering 18–24 months durability, EXO v5 represents a significant step forward in ease of use and long-term protection.
Using advanced composite siloxane technology, EXO v5 makes water spots and road grime easy to remove while offering excellent resistance to wash chemicals and improved protection against micro-marring. The result is a high-gloss, warm-looking and extremely hydrophobic finish that enhances both appearance and maintenance.
Gtechniq EXO v5 Ultra Durable Hydrophobic Coating Key Benefits
- 18–24 months durability
- Easy to apply one-layer product
- Adds gloss, water and dirt repellency
- Excellent resistance to wash chemicals
- Improved swirl and micro-marring resistance
Why Use Gtechniq EXO v5 Ultra Durable Hydrophobic Coating?
EXO v5 produces a consistent film that is more durable and more resistant to road salt and wash chemicals than previous versions. Application has been improved with a slower flash-off time, giving more working time to achieve a flawless finish with just a single layer of product.
Combined with a good degree of swirl resistance, EXO v5 delivers a major leap forward in last surface protection technology, making it suitable as both a standalone coating or a hydrophobic top layer.
Gtechniq EXO v5 Application Information
- EXOv5 can be applied as a standalone coating or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light (CSL) – we recommend applying C1 or CSL as a base coat for easy-to-mark and dark paints
- If you are applying over C1, EXOv5 should be applied a minimum of 4 hours, but less than 12 hours, after you finish the C1 application
- If you are applying over CSL, EXOv5 should be applied at least 1 hour after application of the CSL.
- Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees Celsius, is completely dry and will stay dry for at least 12 hours after application
- Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe directly to the cloth and not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
- Shake the bottle well and wear gloves
- Prime the AP2 Ultra Soft Foam Filled Applicator evenly with a good amount of product so that the pad is saturated
- Apply with the applicator provided in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm). Wait for 1 to 2 minutes after applying to a panel and buff with an MF1, followed by a second MF1 to remove any smearing, leaving the surface slick. Just a single layer of product is required.
- Allow the coating to cure for at least 12 hours before exposure to moisture
- After application, we recommend that you do not wash the car for at least 7 days
- Store in a cool, dry place
- If opened, use within 3 months, if unopened, use within 12 months
- Avoid direct application to plastic trims, rubbers and hard plastic, such as headlights & taillights.
Gtechniq EXO v5 Storage and Care
- Store in a cool, dry place.
- If opened, use within 3 months.
- If unopened, use within 12 months.
- Avoid direct application to plastic trims, rubbers and hard plastics such as headlights and taillights.
